N10-009시험대비덤프공부문제, N10-009퍼펙트덤프샘플다운로드

참고: DumpTOP에서 Google Drive로 공유하는 무료, 최신 N10-009 시험 문제집이 있습니다: https://drive.google.com/open?id=1U4hzGIRAAWpuoxbgGNjdzcrgkaXK9svV

DumpTOP는 가장 효율높은 CompTIA N10-009시험대비방법을 가르쳐드립니다. 저희 CompTIA N10-009덤프는 실제 시험문제의 모든 범위를 커버하고 있어 CompTIA N10-009덤프의 문제만 이해하고 기억하신다면 제일 빠른 시일내에 시험패스할수 있습니다. 경쟁율이 심한 IT시대에 CompTIA N10-009시험 패스만으로 이 사회에서 자신만의 위치를 보장할수 있고 더욱이는 한층 업된 삶을 누릴수도 있습니다.

CompTIA N10-009 덤프의 높은 적중율에 놀란 회원분들이 계십니다. 고객님들의 도와 CompTIA N10-009 시험을 쉽게 패스하는게 저희의 취지이자 최선을 다해 더욱 높은 적중율을 자랑할수 있다록 노력하고 있습니다. 뿐만 아니라 DumpTOP에서는한국어 온라인서비스상담, 구매후 일년무료업데이트서비스, 불합격받을수 환불혹은 덤프교환 등탄탄한 구매후 서비스를 제공해드립니다.

>> N10-009시험대비 덤프공부문제 <<

N10-009퍼펙트 덤프샘플 다운로드 - N10-009인증시험 인기덤프

DumpTOP이 바로 아주 좋은CompTIA N10-009인증시험덤프를 제공할 수 있는 사이트입니다. DumpTOP 의 덤프자료는 IT관련지식이 없는 혹은 적은 분들이 고난의도인CompTIA N10-009인증시험을 패스할 수 있습니다. 만약DumpTOP에서 제공하는CompTIA N10-009인증시험덤프를 장바구니에 넣는다면 여러분은 많은 시간과 정신력을 절약하실 수 있습니다. 우리DumpTOP 의CompTIA N10-009인증시험덤프는 DumpTOP전문적으로CompTIA N10-009인증시험대비로 만들어진 최고의 자료입니다.

최신 CompTIA Network+ N10-009 무료샘플문제 (Q62-Q67):

질문 # 62
Which of the following would be violated if an employee accidentally deleted a customer's data?

• A. Vulnerability
• B. Integrity
• C. Confidentiality
• D. Availability

정답：D

설명：
Availability refers to ensuring that data is accessible when needed. If a customer's data is accidentally deleted, it impacts availability, as the data can no longer be accessed.
=

질문 # 63
A network administrator determines that some switch ports have more errors present than expected.
The administrator traces the cabling associated with these ports.
Which of the following would most likely be causing the errors?

• A. arp
• B. ipconfig
• C. nmap
• D. tracert

정답：B

질문 # 64
A network technician replaced an access layer switch and needs to reconfigure it to allow the connected devices to connect to the correct networks.
INSTRUCTIONS
Click on the appropriate port(s) on Switch 1 and Switch 3 to verify or reconfigure the correct settings:
Ensure each device accesses only its
correctly associated network.
Disable all unused switchports.
. Require fault-tolerant connections
between the switches.
. Only make necessary changes to
complete the above requirements.

정답：

설명：
See the solution below in Explanation.
Explanation:
To provide a complete solution for configuring the access layer switches, let's proceed with the following steps:
* Identify the correct VLANs for each device and port.
* Enable necessary ports and disable unused ports.
* Configure fault-tolerant connections between the switches.
Port 1 Configuration (Uplink to Core Switch)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN150, VLAN220 Port 2 Configuration (Uplink to Core Switch)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN150, VLAN220 Port 3 Configuration (Server Connection)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN90 (Servers)
Port 4 Configuration (Server Connection)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN90 (Servers)
Port 5 Configuration (Wired Users and WLAN)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN120, VLAN150
Port 6 Configuration (Wired Users and WLAN)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN120, VLAN150
Port 7 Configuration (Voice and Wired Users)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN220
Port 8 Configuration (Voice, Printers, and Wired Users)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN220
Port 1 Configuration (Unused)
* Status: Disabled
* LACP: Disabled
Port 2 Configuration (Unused)
* Status: Disabled
* LACP: Disabled
Port 3 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
Port 4 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
Port 5 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
Port 6 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
Port 7 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
* Ports 1 and 2 on Switch 1 are configured as trunk ports with VLAN tagging enabled for all necessary VLANs.
* Ports 3 and 4 on Switch 1 are configured for server connections with VLAN 90 untagged.
* Ports 5, 6, 7, and 8 on Switch 1 are configured for devices needing access to multiple VLANs.
* Unused ports on Switch 3 are disabled.
* Ports 3, 4, 5, 6, and 7 on Switch 3 are enabled for default VLAN1.
* Core Switch Ports should be configured as needed for uplinks to Switch 1.
* Ensure LACP is enabled for redundancy on trunk ports between switches.
By following these configurations, each device will access only its correctly associated network, unused switch ports will be disabled, and fault-tolerant connections will be established between the switches.

질문 # 65
SIMULATION
A network administrator has been tasked with configuring a network for a new corporate office. The office consists of two buildings, separated by 50 feet with no physical connectivity. The configuration must meet the following requirements:
. Devices in both buildings should be
able to access the Internet.
. Security insists that all Internet traffic
be inspected before entering the
network.
. Desktops should not see traffic
destined for other devices.
INSTRUCTIONS
Select the appropriate network device for each location. If applicable, click on the magnifying glass next to any device which may require configuration updates and make any necessary changes.
Not all devices will be used, but all locations should be filled.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

정답：

설명：
See the answer and solution below
Explanation:
Devices in both buildings should be able to access the Internet.
Security insists that all Internet traffic be inspected before entering the network.
Desktops should not see traffic destined for other devices.
Here is the corrected layout with explanation:
Building A:
Switch: Correctly placed to connect all desktops.
Firewall: Correctly placed to inspect all incoming and outgoing traffic.
Building B:
Switch: Not needed. Instead, place a Wireless Access Point (WAP) to provide wireless connectivity for laptops and mobile devices.
Between Buildings:
Wireless Range Extender: Correctly placed to provide connectivity between the buildings wirelessly.
Connection to the Internet:
Router: Correctly placed to connect to the Internet and route traffic between the buildings and the Internet.
Firewall: The firewall should be placed between the router and the internal network to inspect all traffic before it enters the network.
Corrected Setup:
Top-left (Building A): Switch
Bottom-left (Building A): Firewall (inspect traffic before it enters the network) Top-middle (Internet connection): Router Bottom-middle (between buildings): Wireless Range Extender Top-right (Building B): Wireless Access Point (WAP) In this corrected setup, the WAP in Building B will connect wirelessly to the Wireless Range Extender, which is connected to the Router. The Router is connected to the Firewall to ensure all traffic is inspected before it enters the network.
Configuration for Wireless Range Extender:
SSID: CORP
Security Settings: WPA2 or WPA2 - Enterprise
Key or Passphrase: [Enter a strong passphrase]
Mode: [Set based on your network plan]
Channel: [Set based on your network plan]
Speed: Auto
Duplex: Auto
With these settings, both buildings will have secure access to the Internet, and all traffic will be inspected by the firewall before entering the network. Desktops and other devices will not see traffic intended for others, maintaining the required security and privacy.

To configure the wireless range extender for security, follow these steps:
SSID (Service Set Identifier):
Ensure the SSID is set to "CORP" as shown in the exhibit.
Security Settings:
WPA2 or WPA2 - Enterprise: Choose one of these options for stronger security. WPA2-Enterprise provides more robust security with centralized authentication, which is ideal for a corporate environment.
Key or Passphrase:
If you select WPA2, enter a strong passphrase in the "Key or Passphrase" field.
If you select WPA2 - Enterprise, you will need to configure additional settings for authentication servers, such as RADIUS, which is not shown in the exhibit.
Wireless Mode and Channel:
Set the appropriate mode and channel based on your network design and the environment to avoid interference. These settings are not specified in the exhibit, so set them according to your network plan.
Wired Speed and Duplex:
Set the speed to "Auto" unless you have specific requirements for 100 or 1000 Mbps.
Set the duplex to "Auto" unless you need to specify half or full duplex based on your network equipment.
Save Configuration:
After making the necessary changes, click the "Save" button to apply the settings.
Here is how the configuration should look after adjustments:
SSID: CORP
Security Settings: WPA2 or WPA2 - Enterprise
Key or Passphrase: [Enter a strong passphrase]
Mode: [Set based on your network plan]
Channel: [Set based on your network plan]
Speed: Auto
Duplex: Auto
Once these settings are configured, your wireless range extender will provide secure connectivity for devices in both buildings.
Firewall setting to to ensure complete compliance with the requirements and best security practices, consider the following adjustments and additions:
DNS Rule: This rule allows DNS traffic from the internal network to any destination, which is fine.
HTTPS Outbound: This rule allows HTTPS traffic from the internal network (assuming 192.169.0.1/24 is a typo and should be 192.168.0.1/24) to any destination, which is also good for secure web browsing.
Management: This rule allows SSH access to the firewall for management purposes, which is necessary for administrative tasks.
HTTPS Inbound: This rule denies inbound HTTPS traffic to the internal network, which is good unless you have a web server that needs to be accessible from the internet.
HTTP Inbound: This rule denies inbound HTTP traffic to the internal network, which is correct for security purposes.
Suggested Additional Settings:
Permit General Outbound Traffic: Allow general outbound traffic for web access, email, etc.
Block All Other Traffic: Ensure that all other traffic is blocked to prevent unauthorized access.
Firewall Configuration Adjustments:
Correct the Network Typo:
Ensure that the subnet 192.169.0.1/24 is corrected to 192.168.0.1/24.
Permit General Outbound Traffic:
Rule Name: General Outbound
Source: 192.168.0.1/24
Destination: ANY
Service: ANY
Action: PERMIT
Deny All Other Traffic:
Rule Name: Block All
Source: ANY
Destination: ANY
Service: ANY
Action: DENY
Here is how your updated firewall settings should look:
Rule Name
Source
Destination
Service
Action
DNS Rule
192.168.0.1/24
ANY
DNS
PERMIT
HTTPS Outbound
192.168.0.1/24
ANY
HTTPS
PERMIT
Management
ANY
192.168.0.1/24
SSH
PERMIT
HTTPS Inbound
ANY
192.168.0.1/24
HTTPS
DENY
HTTP Inbound
ANY
192.168.0.1/24
HTTP
DENY
General Outbound
192.168.0.1/24
ANY
ANY
PERMIT
Block All
ANY
ANY
ANY
DENY
These settings ensure that:
Internal devices can access DNS and HTTPS services externally.
Management access via SSH is permitted.
Inbound HTTP and HTTPS traffic is denied unless otherwise specified.
General outbound traffic is allowed.
All other traffic is blocked by default, ensuring a secure environment.
Make sure to save the settings after making these adjustments.

질문 # 66
An organization requires the ability to send encrypted email messages to a partner from an email server that is hosted on premises. The organization prefers to use the standard default ports when creating firewall rules. Which of the following ports should be open to satisfy the requirements?

• A. 0
• B. 1
• C. 2
• D. 3

정답：C

설명：
Port 587 is the standard default port for sending email (SMTP) with TLS encryption, which is used to secure email transmissions between mail servers or between clients and mail servers. Allowing traffic over port 587 enables secure email sending while maintaining standard protocol usage.

질문 # 67
......

요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 DumpTOP의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에CompTIA N10-009인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.

N10-009퍼펙트 덤프샘플 다운로드: https://www.dumptop.com/CompTIA/N10-009-dump.html

CompTIA N10-009시험대비 덤프공부문제 높은 적중율에 비해 너무 착한 가격, DumpTOP N10-009퍼펙트 덤프샘플 다운로드는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다, 이 글을 보시게 된다면CompTIA인증 N10-009시험패스를 꿈꾸고 있는 분이라고 믿습니다, 저희는 수시로 CompTIA Network+ Certification Exam N10-009덤프 업데이트 가능성을 체크하여 N10-009덤프를 항상 시중에서 가장 최신버전이 될수있도록 최선을 다하고 있습니다, CompTIA N10-009덤프는 이 시험에 대비한 가장 적합한 자료로서 자격증을 제일 빠르게 간편하게 취득할수 있는 지름길입니다, 우리DumpTOP에서는 여러분이N10-009인증시험을 편리하게 응시하도록 전문적이 연구팀에서 만들어낸 최고의N10-009덤프를 제공합니다, DumpTOP와 만남으로 여러분은 아주 간편하게 어려운 시험을 패스하실 수 있습니다, DumpTOP에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이CompTIA인증N10-009시험을 패스할 수 있을 자료 등을 만들었습니다, DumpTOP 에서는 일년무료 업뎃을 제공하며, DumpTOP 의 덤프들은 모두 높은 정확도를 자랑합니다.

점장의 사과에 우리는 고개를 저었다, 저도 막 전화를 하려던 참이었어요, 높은 적중율에 비해 너무 착한 가격, DumpTOP는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다, 이 글을 보시게 된다면CompTIA인증 N10-009시험패스를 꿈꾸고 있는 분이라고 믿습니다.

시험대비에 가장 좋은 N10-009시험대비 덤프공부문제 덤프 최신문제

저희는 수시로 CompTIA Network+ Certification Exam N10-009덤프 업데이트 가능성을 체크하여 N10-009덤프를 항상 시중에서 가장 최신버전이 될수있도록 최선을 다하고 있습니다, CompTIA N10-009덤프는 이 시험에 대비한 가장 적합한 자료로서 자격증을 제일 빠르게 간편하게 취득할수 있는 지름길입니다.

• N10-009시험대비 덤프공부문제 최신 시험 기출문제와 예상문제 모음 자료 🔷 ➡ www.itcertkr.com ️⬅️에서☀ N10-009 ️☀️를 검색하고 무료 다운로드 받기N10-009시험대비 최신버전 덤프샘플
• N10-009시험대비 덤프공부문제 시험덤프공부자료 ✡ ⇛ www.itdumpskr.com ⇚에서➽ N10-009 🢪를 검색하고 무료로 다운로드하세요N10-009최신 덤프문제
• 최신버전 N10-009시험대비 덤프공부문제 완벽한 시험대비자료 🙋 ⮆ www.koreadumps.com ⮄을(를) 열고➥ N10-009 🡄를 입력하고 무료 다운로드를 받으십시오N10-009최신 덤프문제
• 최신버전 N10-009시험대비 덤프공부문제 완벽한 시험대비자료 📋 무료 다운로드를 위해“ N10-009 ”를 검색하려면➽ www.itdumpskr.com 🢪을(를) 입력하십시오N10-009최고품질 덤프샘플문제 다운
• N10-009최고품질 덤프문제 🎃 N10-009퍼펙트 최신 덤프문제 🏨 N10-009퍼펙트 공부 🍶 무료 다운로드를 위해☀ N10-009 ️☀️를 검색하려면{ www.dumptop.com }을(를) 입력하십시오N10-009시험유형
• N10-009유효한 덤프자료 ☕ N10-009시험대비 공부자료 🕳 N10-009시험유형 🍛 검색만 하면《 www.itdumpskr.com 》에서[ N10-009 ]무료 다운로드N10-009인증덤프문제
• 시험대비 N10-009시험대비 덤프공부문제 최신 덤프문제 🥒 검색만 하면➽ www.itcertkr.com 🢪에서{ N10-009 }무료 다운로드N10-009인증시험 인기 시험자료
• N10-009시험대비 덤프공부문제 시험덤프공부자료 🏝 [ www.itdumpskr.com ]의 무료 다운로드▶ N10-009 ◀페이지가 지금 열립니다N10-009퍼펙트 공부
• 시험대비 N10-009시험대비 덤프공부문제 최신 덤프공부 ☕ ⏩ www.itcertkr.com ⏪은➤ N10-009 ⮘무료 다운로드를 받을 수 있는 최고의 사이트입니다N10-009퍼펙트 덤프 최신 샘플
• N10-009시험유형 🤽 N10-009최고품질 덤프샘플문제 다운 ❤ N10-009적중율 높은 시험덤프공부 🚐 오픈 웹 사이트【 www.itdumpskr.com 】검색☀ N10-009 ️☀️무료 다운로드N10-009응시자료
• N10-009인증덤프공부문제 🐋 N10-009시험자료 🏜 N10-009적중율 높은 시험덤프공부 😝 ⇛ www.koreadumps.com ⇚웹사이트를 열고[ N10-009 ]를 검색하여 무료 다운로드N10-009인증시험 인기 시험자료
• N10-009 Exam Questions
• lmsproject.actionforecu.org thinkcareer.org school.celebrationministries.com emanubrain.com tutor.dhruvivaidya.com beinstatistics.com 星界天堂.官網.com four.academy www.wpcnc.soumencoder.com eab.com.bd

참고: DumpTOP에서 Google Drive로 공유하는 무료 2025 CompTIA N10-009 시험 문제집이 있습니다: https://drive.google.com/open?id=1U4hzGIRAAWpuoxbgGNjdzcrgkaXK9svV